CCTV-21P-48
Category:SPD for CCTV
Din Rail Network Power Supply 2-in-1 SPD
Tel:+86-577-62605321
Email:andy.xu@tycotiu.com
PDF Download
Features:
Comply with IEC61643-21 standard
Din Rail installation
Max. discharge current: 10kA
Excellent signal transmission performance
Insertion loss: ≤0.3dB
Connectiion(Power/RJ45): Terminal block/RJ45
Integrated design, multi-function voltage protection
Parameters:
Model
CCTV-21P-48
Test standards
IEC 61643-21
Max. continuous operating voltage
(power)Uc
60VAC
C2 Nominal discharge current (8/20μs)
In
5kA
Voltage protection level [line-line/shield]
(RJ45)Up
≤30V
Operating temperature range
Tu
-40℃-80℃
Connection input / output
RJ45/Power
RJ45/Terminal block
Enclosure material
Thermoplastic
Degree of protection
IP20
Max. continuous operating voltage
(RJ45)Uc
6VDC/4VAC
Nominal current
IL
0.5A
C2 Max. discharge current (8/20μs)
Imax
10kA
Voltage protection level [line/shield-PG]
(RJ45)Up
≤500V
Voltage protection level
(power)Up
≤200V
Response time [line-line/shield]
tA
≤1ns
Response time [line/shield-PG]
tA
≤100ns
Bandwidth
30 Mbps
Insertion loss
≤0.3dB
Application:
It is suitable for equipment protection of network 2-in-1 video surveillance system
Mainly used for surge protection of various video surveillance cameras
It can effectively absorb and discharge electromagnetic interference, pulse and other line surges in power lines and network cables, and protect monitoring equipment from lightning strike.
Installation and Maintenance:
Installed in series between the protected equipment and power line.
The output end is connected with the protected equipment, which can not be connected in reverse.
After installation and wiring, check that the wiring is correct and firm, then switch on the power supply and put into use
