TYPV3
Category:T2 photovoltaic DC surge protector（8/20µs）
3 Mods Type 2 Photovoltaic DC Surge Protection Device
Tel:+86-577-62605321
Email:andy.xu@tycotiu.com
PDF Download
Features:
TYPV3 series is Type 2 surge arrestor for DC systems
Max. continuous operating voltage UC：600VDC / 1000VDC / 1500VDC
Max. discharge current Imax(8/20μs): 40kA
3 Module Design
With status indication
Din rail installation
Remote signaling is optional
Comply with IEC 61643-31 and EN 61643-31
Parameters:
Model
TYPV3-1000
SPD classification according to EN61643-31
Type 2
SPD classification according to IEC61643-31
Class II
Max. continuous operating d.c. voltage
Ucpv
1000V
Nominal discharge current(8/20μs)
In
20kA
Voltage protection level [(DC+/DC-)→PE]
Up
≤4.0kV
Response time
tA
≤25ns
Operating temperature range
Tu
-40℃-80℃
Operating state / fault indication
green / red
Cross-section area (Min.)
4mm²
Cross-section area (Max.)
35mm²
For mounting on
35mm Din rail
Enclosure material
Degree of protection
IP20
TYPV3-600
TYPV3-1500
Type 2
Type 2
Class II
Class II
600V
1500V
20kA
20kA
Max. discharge current(8/20μs)
Imax
40kA
40kA
40kA
≤2.8kV
≤5.2kV
≤25ns
≤25ns
-40℃-80℃
-40℃-80℃
green / red
green / red
4mm²
4mm²
35mm²
35mm²
35mm Din rail
35mm Din rail
Thermoplastic UL94-V0
IP20
IP20
Application:
It is suitable for lightning protection of DC power system such as solar photovoltaic power system.
Widely used in photovoltaic DC combiner box, inverter, controller, photovoltaic DC cabinet, etc.
Installation and Maintenance:
It is installed in parallel in the DC system, recommended to be installed at both ends of the DC power line (solar panel side and inverter/converter side).
