TYPN-06

Category:TYPN series signal lightning protector

RS485/422 Signal Lightning Protection Device

PDF Download

Features:

Comply with IEC61643-21 standard

Nominal voltage Un：6V

Impulse discharge current Iimp: 5kA

Max. discharge current Imax: 20kA

insertion loss：＜1dB

Excellent transmission performance

It is composed of a pluggable module and a fixed base

Connection: screw

Parameters:

Model		TYPN-06
Test standard		IEC 61643-21
Application		RS422, RS485*
Structure		1-pair + shielded
Rated operational voltage	Un	6V
Max. continuous operating voltage	Uc	8V
Nominal current	IL	300mA
Lightning impulse current (10/350μs)	Iimp	5kA
C2 Nominal discharge current (8/20μs)	In	5kA
C2 Max.discharge current (8/20μs)	Imax	20kA
Voltage protection level	Up	≤20V
Max. frequency	f max	＞3 MHz
Failsafe behavior		Short-circuit
Operating temperature range	Tu	-40℃-80℃
Connection		Screw terminal
Insertion loss		≤1 dB
For mounting on		35mm Din rail
Enclosure material		Thermoplastic UL94-V0
Degree of protection		IP20

Application:

Protect industrial fieldbus, telephone lines, signal and data lines, etc.

Widely used in RS485/422 signal line lightning protection

Prevent surge to invade equipment along the signal line and cause equipment damage

Installation and Maintenance:

35mm standard din rail installation

The connection mode is series

Connect the output terminal (OUT) to a protected device, do not connect in reverse

Get as close to the protected device as possible

After installation, check the wiring is correct and firm, then the power can be connected and put into use